Home / Cranes / New 2008 LinkBelt RTC 8065 Series II
View LARGER image in new windowNew 2008 LinkBelt RTC 8065 Series II
One Available September 2008
Specifications
- 38-115 ft (11.6-35.0 m)
- four section boom
- Optional 35-58 ft (10.7-17.7 m)
- two piece offsettable fly
- Optional 16 ft (4.88 m) lattice
- insert used alone or with
- 58 ft (17.7 m) two-piece
- bi-fold fly
- Optional two 16 ft (4.88 m)
- lattice inserts plus 58 ft
- (17.7 m) two-piece bi-fold
- lattice fly
- 211 ft 7 in (64.5 m) maximum
- tip height
- Height: 12 ft 2in (3.7 m)
- Width: 10 ft 7 in (3.2 m)
- Length: 45 ft 6 in (13.9 m)
- 23.7 mph (38.1 km/hr) travel speed
- 14 ft 7 in (4.45 m) wheel base
- 26.5x25-26PR tires
- Caterpillar 3126B 7.2L 225 hp (168 kW) diesel engine
- Spicer 6 speed power shift transmission
- 24 ft (7.32 m) outrigger spread, 24 ft (7.32 m) outrigger base
- 17,182 lbs (7 793.6 kg) maximum winch line pull
- 459 fpm (139.9 m/min) maximum winch line speed
- Key Features:
- Fully rigged transport weight of less than 90,000 lbs (40,823.3kg)
- Boom wear pads have Teflon pucks that lubricate the boom sections (No grease)
- Four fly options feature 4 offset positions of 2°, 15°, 30°, and 45°.
- Next generation operator’s cab with improved visibility and ergonomics
- Integral air conditioning - optional
- 4-Link suspension on the rear axle with an optional Hydro-Gas Ride™ system
- 4-mode steering controlled from the steering wheel
- Full-length flat deck with integrated steps and handholds
- Large swing out engine hood doors for ease of service
Warranty Information
- 1 Year Full Machine